Starlight Pro Curing Light
Product Code:
66096829
Stock Available
Product info
A cordless LED curing lamp for flexible use that can be taken from one room to the other. Thanks to its high performance level and the long-lasting lithium-ion battery, it will run for 320 cycles of 10 seconds each in succession and recharging takes only 120 minutes. Its output can be checked thanks to the built-in radiometer. starlight pro can be relied on to harden a 2-mm thick layer in only 10 seconds and is extremely light (only 105 g).
- Power Density 1400 mW/cm²
- sterilizable, fibre optics conductor, Ø 8 mm
- it does not require a fan as it develops no heat – silent
- the smooth, continuous and compact surface enables perfect disinfection
- constant light power regardless the charge level
- the double acoustic signal is activated when the battery is still sufficient for 6 cycles
- only 120 minutes charging time and 320 cycles with 10 seconds mode
- integrated radiometer
- green control LEDs indicating mains supply and signalling consent for charging process and power output
- in case of problems a yellow LED will flash
OPERATING MODES
"Fast“ mode: 10 seconds at maximum light intensity, with acoustic signal at the beginning and at the end of the cycle
"Slow rise“ mode: 20 seconds with a progressive increase of the light intensity reaching the peak within the first 3 seconds, one acoustic signal after 10 seconds and one at the end of the cycle
- Power Density 1400 mW/cm²
- sterilizable, fibre optics conductor, Ø 8 mm
- it does not require a fan as it develops no heat – silent
- the smooth, continuous and compact surface enables perfect disinfection
- constant light power regardless the charge level
- the double acoustic signal is activated when the battery is still sufficient for 6 cycles
- only 120 minutes charging time and 320 cycles with 10 seconds mode
- integrated radiometer
- green control LEDs indicating mains supply and signalling consent for charging process and power output
- in case of problems a yellow LED will flash
OPERATING MODES
"Fast“ mode: 10 seconds at maximum light intensity, with acoustic signal at the beginning and at the end of the cycle
"Slow rise“ mode: 20 seconds with a progressive increase of the light intensity reaching the peak within the first 3 seconds, one acoustic signal after 10 seconds and one at the end of the cycle